FISTUNE DAB, DAB+ integration Can Bus Plug & Play for Audi, VW, Skoda, Seat

FISTUNE DAB, DAB+ integration Can Bus Plug & Play for Audi, VW, Skoda, Seat

$325.00
Brand: VAG
Product Code: 42222
Availability: In Stock
Viewed 1547 times

Product Description

FISTUNE DAB, DAB+ integration Can Bus Plug & Play for Audi, VW, Skoda, Seat

Product information "FISTUNE DAB, DAB+ integration Can Bus Plug & Play for Audi, VW, Skoda, Seat

  • the FISTUNE DAB + interface is fully integrated into the vehicle
  • all available information is displayed in your radio system as MDI or AMI
  • The tuner is connected to the vehicle via the original MDI or AMI interface
  • DAB text support, not on every radio
  • suitable for VW vehicles with the following radio / navigation unit*:
  • RNS 510 / RNS 810
  • RCD 510
  • RNS 310/315
  • RCD 310/315
  • Skoda Columbus (PR-No .: 7T6)
  • Skoda Amundsen (PR No .: 7T2)
  • Skoda Bolero
  • Skoda swing
  • Seat RNS 310/315
  • Seat RNS 510
  • Audi Concert III
  • Audi Symphony III
  • Fitting for following vehicles:
  • Audi A3 8P
  • Audi A4 8K
  • Audi A5 8T / 8F
  • Audi Q5 8R
  • Audi TT 8J
  • Audi R8 42
  • Volkswagen Polo (6R)
  • Volkswagen Golf 5, Jetta (1K0)
  • Volkswagen Jetta (5C)
  • Volkswagen Golf 6 (5K)
  • Volkswagen Tiguan (5N)
  • Volkswagen Touran (1T0)
  • Volkswagen EOS (1F)
  • Volkswagen Passat 3C
  • Volkswagen Passat CC
  • Volkswagen Passat (B7)
  • Volkswagen CC
  • Volkswagen Sharan (7N)
  • Volkswagen Caddy (2K)
  • Volkswagen Scirocco (1K8)
  • Volkswagen T5 (7E)
  • Volkswagen The Beetle (5C)
  • Volkswagen Amarok (2H)
  • Skoda Fabia (54.57)
  • Skoda Octavia II (1Z)
  • Skoda Rapid (NH)
  • Skoda Roomster (5y)
  • Skoda SuperB (3T)
  • Skoda Yeti (5L)
  • Seat Alhambra (7N)
  • Seat Toledo (3R)


Selectable options:

  • VW, Seat, Skoda
  • RNS 510
  • RCD 510
  • RNS 310/315
  • RCD 315/315
  • Skoda Columbus (PR no. 7T6)
  • Skoda Amundsen (PR no. 7T2)
  • Skoda Bolero
  • Skoda Swing
  • Seat RNS 310/315
  • Audi, Seat RNS E Media
  • Seat RNS E Media
  • Audi RNS E Media
  • Audi Concert 3, Symphony 3
  • Audi Concert III
  • Audi Symphony III

Connections:

  • FISTUNE DAB+ interface
  • DAB+ antenna

Technical specifications:

  • Frequency: 170 ~ 230 MHz (VHF)
  • Antenna input impedance: 75 ohms
  • Supports active and passive antennas
  • Dimensions: 9.2 cm x 7.7 cm x 2.6 cm
  • Weight: 195 g
  • Operating voltage: 12 ~ 24 V DC
  • Power consumption: 2.8 watts

Scope of Delivery:

  • Interface DAB+
  • Plug and Play harness

Note:

  • the on-board DAB antenna can also be used for DAB+
  • If an MDI or AMI interface is installed, additionally article 43381 is required
  • not suitable for vehicles with combination control unit for hands-free system + MDI (PR-No.: 9ZA, 9ZB, 9W7, 9ZR)
  • no automatic station search, this must be started manually via the radio
  • a new manual station search is only necessary for regional ensembles if the location of the vehicle changes and thus the regional ensembles change
  • For national ensembles, no new station search is necessary

Product type: Complete kit

Product group: Infotaiment und Multimedia

Weight (in kg): 1.08

Hardware: 1.0

Software: 4.1

Installation time (in h): 2

EAN: 4250363334762

Hardwares

We send by DHL express or Standard shipping. Delivery takes 1-5 days for DHL Express, and 10-20 days for standard shipping.
  • 0%
  • 0%
  • 0%
  • 0%
  • 0%

Reviews Over FISTUNE DAB, DAB+ integration Can Bus Plug & Play for Audi, VW, Skoda, Seat

Total Reviews (0)
click here write review to add review for this product.


Firmware

If you install unofficial firmwares from unknown sources the answer is Yes. But if you buy from us the answer is no. Because we also register the update to dealer network. Firmware updates we provide are official updates and installing them has no effect to your warranty. For unofficial firmware updates you may read this blog post: Unofficial Firmware Updates May Void Your Warranty!

Check Installed SW Train Version:

MST2_EU_VW: Delphi (MIB2 Std)
MST2_EU_VW_PQ: Technisat/Preh (MIB2 Std)
MST2_EU_VW_ZR: Technisat/Preh (MIB2 Std)
MHI2_ER_VWG11: Harman (MIB2 High)
MHI2_ER_VWG13: Harman (MIB2.5 High)
MHI3: MIB3 Alpine
MOI3: MIB3 LG or Preh
MENT: MIB2 Entry
MH2p: pre MIB3
MHI2Q: MIB2 High
MHIG: MIB1 High
MHS2: MIB2 Delphi
MPR3: MIB3
MS2P: MIB2 Std
MSTD: MIB1 Std
MEN2: MIB2
MEN3: MIB3

To find your Installed SW Train Version,

For Audi MIB3:
Tap and hold top right corner of your screen with two fingers to go to red engineering menu, navigate to version information menu there.

For others use the shortcuts on keyboard as described here: https://vagupdate.com/blog/key-combinations-and-shortcuts-to-check-firmware-version

For VW MIB2 Press and hold menu button. Select "software update". You will see a screen below:


Unfortunately there is not any officially published changelog by manufacturers but according to our previous experience we can say that it has bug fixes, support for new bluetooth channels which comes with new smart phones, better voice command recognition, faster navigation route calculation, translate error fixes, faster smartphone connection for carplay/android auto and theme bug fixes. You can experience result when you use it.
If you ordered firmware update, You need to provide "Installed SW Train Version" and "Installed SW MU Version" informations to us.
To find it, press and hold menu button and select software update. You will see it at first row as you see in screenshot below.
You may send us this screenshot via email (orders[at]vagupdate.com).
Do not send images over whatsapp because it will not be recorded under your order and also images are unable to be downloaded after some time passed.
 
We are unable to send you download URL without checking this info.
You will get download URL within 1-3 hours after providing the required information.
 
If your MIB or MMI has a spesific version which is not very common it may take up to 24 hours to get your software from dealer network and upload for your download.
 

We save firmware update process to dealer network by your VIN to keep your warranty valid. Also the firmwares are dedicated to VIN number to keep all functions and setting same after the update. It is valid only for that VIN. So we need your VIN to prepare firmware for your infotainment system.

Yes you can do it on yourself. It is easy process.

Requirements:

  • Class 10 Exfat formatted empty SD card or USB Flash Memory. (We recommend SD card for MIB2 devices. Type-C USB flash memory is required for updating MIB3 devices) 
  • A computer to download and extract files into SD card or USB flash memory.
  • Enough charged car battery. (Installation takes 20-40 minutes depending on your SD card's or USB flash memory's read speed)
  • Manufacturer does not recommend running engine during update process but if it is certain that your car's battery will get empty, you may run engine during update process. (less risky)
  • Winrar Software: https://www.rarlab.com/download.htm

Installation:

  • Download firmware and extract it to desktop of your computer using winrar app.
  • Copy all contents in that folder into SD card's or USB flash memory's root folder.
    If it is MIB2, metainfo2.txt and other folders must be in root directory, not in a folder or archive. If it is MIB3 data and meta folders must be in root directory)
  • Insert SD card into infotainment system's SD1 slot or USB flash memory to car's USB port. (Do not use "only charge" ports)
  • For MIB2 devices, press and hold menu button. Select system update.
    For Audi MIB3 tap and hold top right corner of screen with two fingers.
    For MIB3 and other devices use shortcut shown here: https://vagupdate.com/blog/key-combinations-and-shortcuts-to-check-firmware-version
  • Go to system update menu, tap on start, show data source (usb or sd card) and update will be started.
  • Once completed it will ask you to connect diagnose device. Just tap on cancel button. System will be restarted and ready to use with the new firmware.

If you get any error or problem please let us know for assistance.

Ask us on Live Chat or send us a message here. You need to provide "Installed SW Train Version" and "Installed SW MU Version" informations to us.

To find it, use this tutorial: https://vagupdate.com/blog/key-combinations-and-shortcuts-to-check-firmware-version
You will see it at first row as you see in screenshot below:

No. You do not need any diagnostic tool or any software. Just an empty FAT32 formatted SD card or USB flash memory (for MIB3) and a computer.

That's all you need to update your infotainment system.

No. This is just an update. It will not activate any function. But will provide stability while using those functions. If you need function activation check this category: Function Activations

No, you cannot. Firmwares are dedicated to VIN number to keep all functions and setting same after the update. It is valid only for the purchased VIN.

If you install to another car, you may lose functions or completely brick the infotainment unit. And this is no covered by your warranty.

Yes PayPal and all major credit cards are accepted.

No, you can't. MIB is hardware. To make an upgrade from MIB1 to MIB2 or MIB2 to MIB3. You need to change your hardware.

You can perform firmware updates only for your existing hardware. For example, you cannot install MIB3 firmware on MIB2 device.