Audi MMI Firmware Update
Available Options
Vehicle Identification Numnber (VIN)
You can find it on bottom right corner for your car's front glass or in registration decuments.
This is required to register your update to the dealer network.
Tags: |
audiupdate infotainment update mmi update audi update firmware infotainment audi mmi |
Product Description
Audi MMI Firmware Update
This is full firmware of Audi MMI MIB1, MIB2, MIB2.5 and MIB3 MMI infotainment systems. You can upgrade your system to reach latest improvement by the producer and new features.
You can update audi MMI easily with this service.
For compatibility questions please contact us.
Digital Product. Nothing physically will be delivered. You will receive download URL.
Requirements:
- Audi MMI MIB1, MIB2, MIB2.5 and MIB3 infotainment system. Standard and High units are supported.
- Class 10 Fat32 formatted empty SD card or USB flash memory. (at least 16gb)
- A computer to download and extract files into SD card. (USB flash memory for MIB3 systems)
- Enough charged car battery. (Installation takes 20-40 minutes depending on your SD card's or USB flash memory's read speed)
Installation:
- Download firmware and extract it to desktop of your computer.
- Copy all contents into SD card's or USB flash memory's root folder. (not in a folder or archive. All files and folders must be readable in root directory)
- Put SD card into infotainment system's SD1 slot or insert USB flash memory to USB port of your car (Do not use USB ports "only for charging").
- For MIB1, MIB2 and MIB2.5: Press and hold menu button. Select system update. (Do not run system update directly from settings menu)
- For MIB3 tap to right up corner of screen with your two finger and wait. Unit will be restarted in "RED" update mode.
- Go to system update, selectstart and update will be started.
- Once completed click "done" icon. System will be restarted.
Any question, feel free to contact us.
Firmware
Check Installed SW Train Version to determine your manufacturer:
MST2_EU_VW: Delphi (MIB2 Std)
MST2_EU_VW_PQ: Technisat/Preh (MIB2 Std)
MST2_EU_VW_ZR: Technisat/Preh (MIB2 Std)
MHI2_ER_VWG11: Harman (MIB2 High)
MHI2_ER_VWG13: Harman (MIB2.5 High)
To find your Installed SW Train Version,
Press and hold menu button. Select "software update". You will see a screen below:
- Download firmware and extract it to desktop of your computer.
- Copy all contents into SD card's or USB flash memories root folder. (not in a folder or archive. All files and folders must be readable in root directory)
- Put SD card into infotainment system's SD1 slot or USB flash memory to car's USB port.
- If you have MIB2, MIB2.5, VW, Seat or Skoda MIB3 Press and hold menu button. Select system update. (Do not run system update directly from settings menu)
- If you have Audi MIB3 tap and hold with your two finger on top right corner of screen. Unit will be restarted in update mode. Go to system update menu there.
- Click start and update will be started.
- Once completed click "done" icon. System will be restarted.
No. You do not need any diagnostic tool or any software. Just an empty FAT32 formatted SD card and a computer.
That's all you need to update your infotainment system.
No, you cannot. Firmwares are dedicated to VIN number to keep all functions and setting same after the update. It is valid only for the purchased VIN.
If you install to another car, you may lose functions or completely brick the infotainment unit. And this is no covered by your warranty.
No, you can't. MIB is hardware. To make an upgrade from MIB1 to MIB2 or MIB2 Std to MIB2 high you need to change your hardware.
You can perform firmware updates only for your existing hardware. For example, you cannot install MIB2 high firmware on MIB2 Std device.
-
50%
-
50%
-
0%
-
0%
-
0%
Reviews Over Audi MMI Firmware Update
Total Reviews (2)
click here write review to add review for this product.