Seat Infotainment Update
Available Options
Vehicle Identification Numnber (VIN)
You can find it on bottom right corner for your car's front glass or in registration decuments.
This is required to register your update to the dealer network.
Select your MIB condition
If your screen goes into blue like below, please select "Emergency Blue Screen"
| seat update firmware infotainment |
Product Description
Seat Infotainment Update
This is full firmware of Seat MIB1 and MIB2 infotainment systems. You can upgrade your system to reach latest improvement by the producer and new features.
For compatibility questions please contact us. Firmwares support all regions including EU.
Digital Product. Nothing physically will be delivered. You will receive download URL.
Please contact us before purchasing to check if there is any newer version is available for your firmware version or not.
If there is no any newer firmware available but you have an order, latest possible version will be sent even if it is your current firmware version. You may reinstall same firmware version to format system and fix possible bugs. You may need VCDS or OBDeleven to enable developer mode to install same firmware version again. For newer version no need any other tools except SD card.
Requirements:
- VW MIB1, MIB2 or MIB2.5 infotainment system. Standard and High units are supported.
- Class 10 Exfat formatted empty SD card.
- A computer to download and extract files into SD card.
- Enough charged car battery. (Installation takes 20-40 minutes depending on your SD card's read speed)
- If you are installing same firmware version again to format your system you may need VCDS or OBDeleven diagnostic tools.
Installation:
- Download firmware and extract it to desktop of your computer.
- Copy all contents into SD card's root folder. (not in a folder or archive. metainfo2.txt file must be readable in root directory)
- Put SD card into infotainment system's SD1 slot.
- Press and hold menu button. Select system update. (Do not run system update directly from settings menu)
- Click start and update will be started.
- Once completed click "done" icon. System will be restarted.
Any question, feel free to contact us.
Firmware
Check Installed SW Train Version to determine your manufacturer:
MST2_EU_VW: Delphi (MIB2 Std)
MST2_EU_VW_PQ: Technisat/Preh (MIB2 Std)
MST2_EU_VW_ZR: Technisat/Preh (MIB2 Std)
MHI2_ER_VWG11: Harman (MIB2 High)
MHI2_ER_VWG13: Harman (MIB2.5 High)
To find your Installed SW Train Version,
Press and hold menu button. Select "software update". You will see a screen below:
- Download firmware and extract it to desktop of your computer.
- Copy all contents into SD card's or USB flash memories root folder. (not in a folder or archive. All files and folders must be readable in root directory)
- Put SD card into infotainment system's SD1 slot or USB flash memory to car's USB port.
- If you have MIB2, MIB2.5, VW, Seat or Skoda MIB3 Press and hold menu button. Select system update. (Do not run system update directly from settings menu)
- If you have Audi MIB3 tap and hold with your two finger on top right corner of screen. Unit will be restarted in update mode. Go to system update menu there.
- Click start and update will be started.
- Once completed click "done" icon. System will be restarted.
No. You do not need any diagnostic tool or any software. Just an empty FAT32 formatted SD card and a computer.
That's all you need to update your infotainment system.
No, you cannot. Firmwares are dedicated to VIN number to keep all functions and setting same after the update. It is valid only for the purchased VIN.
If you install to another car, you may lose functions or completely brick the infotainment unit. And this is no covered by your warranty.
No, you can't. MIB is hardware. To make an upgrade from MIB1 to MIB2 or MIB2 Std to MIB2 high you need to change your hardware.
You can perform firmware updates only for your existing hardware. For example, you cannot install MIB2 high firmware on MIB2 Std device.